Technical Support

CBR Penetration Tests Incorporating Geotextile Membrane

60 Tonne loading maintained for 100 Hrs test to push 16-22mm granite angular chippings through Membrane - weakening of surface but no penetration through Membrane thickness 3.2mm.

100 Tonne loading maintained for 100 Hrs. test to push 20mm rounded gravel through Membrane thickness 2.7 mm. Weakening of Membrane, slight puncturing.

These Tests were conducted on unprotected Metflex 120. The introduction of a protection layer of sand / protection Membrane or increasing the thickness of the Metflex, would give a marked increase in performance.

 

Weathering tests

Time on weatherometer  Tensile strength  Elongation at break
11.39 Mpa.  374%
100 Hrs.  14.32 Mpa.  376%
500 Hrs.  13.25 Mpa.  368%
3268 Hrs.  10.54 Mpa.  379%

QUV accelerated weathering test. 2mm - film thickness.

 

Top
© Metflex Protective Coatings Ltd, 25 - 27 Glasgow Street, Thornaby, Teesside TS17 7AH, England
Tel: + 44 (0) 1642 606652 Fax: +44 (0) 1642 614258 E-mail: info@metflex.uk.com